Projects
How to Initiate a JG-PP Project
Please choose a project to review from the table below or the drop-down menu above.
If you would like to review project information, to include the target, alternatives, and affected programs, please click here, or use the Publications button above and select the Matrix from the drop down menu.
|
Project
|
Project
Objective
|
| Biobased
Metal Working Fluids Project Number: 08-SP-034 |
To develop and implement a preferred procurement program to increase the procurement and use of biobased products. |
|
Biobased
Hydraulic Fluid Product Requirements |
To develop and implement a preferred procurement program to increase the procurement and use of biobased products. |
| Biodiesel
Use in DoD Tactical Vehicles Project Number: 06-SP-032 |
Coordinate the development of a JTP that will evaluate the effects of biodiesel use and establish parameters for use of this fuel in tactical vehicles. |
| Ultraviolet
Light Cure Powder Coating ESTCP Project Number: WP-0801 |
Demonstrate, validate and successfully implement a VOC/HAP-free Ultraviolet cure powder coating on DoD depot production hardware to replace solvent-borne organic coatings. |
| Joint
Service Solvent Substitution Project Number: 05-SP-029 |
Identify and validate solvent substitution alternatives. |
| Cadmium
Replacements for Department of Defense (DoD) and National Aeronautics
Space Administration (NASA) Applications Project Number: J-00-MF-024 |
|
|
Chromium
Electroplating Alternatives for Helicopter Dynamic Components |
Validate alternatives to hard chrome electroplating operations used for coating dynamic components. |
| Nonchromate
Aluminum Pretreatments Project Number: S-00-OC-016 |
Demonstrate
and validate the performance of nonchromate aluminum pretreatments
on DoD
aerospace test platforms.
|
|
Project
|
Project
Objective
|
| Corn
Hybrid Polymer Coating Removal on Delicate Substrates Project Number: 06-CR-031 |
Evaluate using corn based blasting media as a potential process to remove coatings from radomes and other delicate substrates during maintenance, repair and overhaul operations. |
| Low
Temperature Cure Powder Coating (Partnering with ESTCP) Project Number: WP-0614 |
Demonstrate, validate and implement a VOC/HAP-free low temperature cure powder coating on DoD weapon system components in a depot production environment. |
|
Chromium
Electroplating Alternatives for Actuators |
Validate alternatives to hard chrome electroplating operations used for aircraft flight control and utility hydraulic and pneumatic actuators. |
|
Aliphatic
Isocyanate Urethanes |
Project objective is to identify, test, and validate alternatives to Aliphatic Isocyanate Urethanes on carbon steel structural elements across NASA and AFSPC installations (Test Stands, Shuttle Support, Weapon Systems, etc.). |
|
Low
Emission Depainting
|
Project objective is to identify, evaluate, and approve alternative surface preparation technologies. Material and processes will be evaluated with the goal of selecting the processes that will improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination and reduce the amount of hazardous waste generated across NASA and AFSPC installations. |
| Lead-Free
Dry Film Lubricants Project Number: S-95-SP-007 |
Identify and validate more environmentally friendly alternatives to current dry film lubricants. |
| Lead-Free
Solder Project Number: S-01-EM-026 |
JG-PP is partnering with the DoD's JCAA on a project to generate critical reliability data on circuit cards manufactured and reworked with lead-free and eutectic tin-lead solders for military and space applications. |
| Portable
Laser Coating Removal System Project Number: J-00-CR-017 |
Demonstrate the feasibility of using a compact, portable, low-powered, handheld laser system for small-area paint removal. |
|
Alternatives
to Electrodeposited Cadmium for Corrosion Protection and Threaded
Part Lubricity Applications |
Validate cadmium-free coatings for corrosion and lubricity on threaded parts. |
| Chrome-Free
Conversion Coating Project Number: J-95-OC-001 |
Identify and validate a chromate free conversion coating that could be used on all HMSC production programs. The ease of process implementation (i.e., a "drop in" replacement) was also identified as a goal. |
| Chromium-Free
Primer for Inserts and Fasteners Project Number: J-95-MF-003
|
Qualify chromium-free primers for providing galvanic corrosion protection to inserts and fasteners used in aircraft engines. |
|
Chromium
Electroplating Alternatives for Landing Gear |
Validate
alternatives to hard chrome electroplating operations used for landing
gear.
|
|
Chromium
Electroplating Alternatives for Propeller Hubs |
Validate alternatives to hard chrome electroplated coatings used for dimensional restoration of two T-56 engine 54H60 propeller hub parts. |
| Lead-Free
Surface Finishes and Low-VOC Conformal Coatings Project Number: J-96-EM-008 |
Identify and qualify low-VOC conformal coatings and lead-free surface finishes for use in circuit card manufacturing. |
| Low/No-VOC
and Nonchromate Coating System for Support Equipment Project Number: J-99-OC-014 |
Identify and qualify environmentally acceptable alternatives to conventional primers and topcoats used for coating support equipment at DoD and NASA facilities that reduce or eliminate the use of hexavalent chromium, lead, and VOCs (such as MEK and toluene). |
| Low-VOC
Identification Marking Project Number: J-95-OC-005 |
Identify and qualify low-VOC inks and paints used for identification marking. |
| Low-VOC
Topcoats and Primers Project Number: J-95-OC-004 |
Test and qualify a new formulation of paints that involves chemical agent resistant powder paint technology. |
| Nonchromate
Primers for Aircraft Exteriors Project Number: J-95-OC-002 |
Identify and qualify chromium-free primers for use on military aircraft exterior mold line skins. |
| Non-ODC
Oxygen Line Cleaning Project Number: J-99-CL-015 |
Identify and validate one or more technologies that use non-ODCs to clean oxygen lines on DoD and NASA aerospace vehicles. |
|
Solventless
Seawater Ballast Tank Coating Systems |
Expand on previous successful Navy efforts to implement the use of solvent-free coating systems on DoD ships, boats and small-craft. |
|
Project
|
Project
Objective
|
| Non-Chromate
Primers for Military Applications Project Number: 06-OC-030 |
Demonstrate and validate promising nonchromate primers with improved corrosion protection formulation to military specification (MIL-SPEC) requirements. |
| Validation
of Novel Electroactive Polymers (EAP) as Environmentally Compliant
Coatings for Replacement of Hexavalent Chrome Pretreatments ESTCP Project Number - WP-0527 |
Eliminate the military's reliance on hexavalent chrome in coatings applied to aluminum and steel alloys. |
| Low-VOC
Coatings for Medium Caliber Ammunition Project Number: J-98-OC-013 |
Identify and validate low-VOC organic coatings for corrosion protection of medium caliber ammunition projectile bodies. |
| Chromate-Free
Primer and Sealants |
Provide data and knowledge to assist OEM in validating low-VOC and nonchromate primers, nonchromate sealants, and nonchromate passivation. |
| Low-VOC
Adhesive Bonding Primer Project Number: J-01-OC-025 |
Demonstrate, validate and qualify the commercially acceptable low-VOC adhesive bonding primer across all affected military platforms. |
| Low-VOC
Topcoats and Primers |
Develop a JTP for validating alternatives to high-VOC CARCs and non-CARCs. |
| Non-Hexavalent Chromium/No HAPs Aircraft Sealant | Migrate the positive results of a Navy project to evaluate Skyflex Aircraft Sealant as an alternative to polysulfide sealant. |
| NDCEE
Joint Service Initiative (JSI) Task 0429 |
Development of P2 tasks initiated from JG-PP Project Ideas: N1 - Evaluation
of Corn-Based Blasting Media |